FRONT AND REAR PANEL
3
Adjust PTZ position: Press
/
/
/
to move up/down/left/right.
15) USB Port
To quickly backup or upgrade firmware/OSD, you can insert a compatible USB flash drive into this USB port.
Before using the USB flash drive, please use your PC to format the USB flash drive as “FAT32” first.
2.2. Rear Panel
1) VIDEO INPUTS 1 ~ 16 (Depending on Model)
Connect your cameras here.
Note: If you want to make a video backup with audio, please make sure whether your DVR supports the
audio function, and connect audio cameras to the channels which support the audio function.
2) VIDEO OUTPUT
Connect to a VGA monitor for video output.
3) AUDIO IN (Select models only)
Connect to audio sources, microphones, or cameras equipped with audio functions.
Note: Depending on the model you have, th
e
AVP
series supports UP TO FOUR audio-in channels,
which are Audio 1, Audio 2, Audio 3 and Audio 4 accordingly, and the audio data will be
recorded with the video data of CH1, CH2, CH3 and CH4 respectively.
For example, if your DVR supports two audio-in, its audio channels will be Audio 1 and Audio 2.
When you playback CH1, you will also hear the audio recording of Audio 1.
4) AUDIO OUT (Selected models only)
Connect to an audio device, such as an external audio recorder or speaker.
5) IR (Selected models only)
Connect the IR receiver for remote control.
6) EXTERNAL I/O (Selected models only)
Insert the supplied 9PIN DSUB to this port for connecting external devices (external alarm, PTZ camera, etc).
For detailed I/O port PIN configuration, please refer to “APPENDIX 1 PIN CONFIGURATION (Selected models
only)” at page 28.
7) VGA
Connect to a LCD monitor directly.
8) LAN
Connect to router or modem using a network cable.
9) DC 19V
Connect to the supplied adapter.
