ADVANCED OPERATION
11
2)
DETECTION TIMER
Use
/
to change the setting (ON / OFF). When it’s set to “ON”, press “ENTER” to go to its submenu for
further settings.
DETECTION TIMER
FRI
SAT
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTINGS
uv
s
t
MOVE
SELECT
X axis
0 ~ 24 hours. Each time interval within a square is two hours (divided into four 30-minutes).
Y axis
Monday ~ Sunday.
Operation
Move to the start time point, and press enter to set the start time point (marked in red color). Then,
press
/
/
/
to set the timer-recording schedule. After setup, press “ENTER” again to
create an ending time point (marked in yellow color) and press “MENU” to exit.
5.4. DETECTION
In this submenu, you can set up detection-related functions.
Move to “DETECTION”, and press ”ENTER”. The screen will show the following submenu items:
1)
TITLE
Show the camera title of each channel set in “CAMERA”.
2)
DET
The available options vary depending on the model you have.
Select if you want to activate motion detection for the selected channel (ON/OFF).
3)
AREA
Press “ENTER” to set the detection area. You will see similar screens as the following:
Pink blocks represent areas that will not set off motion detection, while the transparent blocks are
the areas that will set off motion detection.
There are two different methods to set the detection area depending on the model you have.
SUN
MON
TUE
WED
THU
FRI
0
2
4
6
8
10 12 14 16 18 20 22 24
