Device
Page 4-5
Device
This menu allows you to view general information on a Bay 28x3 device.
Table 4-4 describes each field in the Device menu.
∆
Note:
For instructions on using this menu, see “Viewing
General Device Information” on page 3-14.
Table 4-4 Device Menu
Field
Description
MDA Version
Read-only field; displays the device’s current version number.
❏
0 — Rev. A
❏
1 — Rev. B
❏
2 — Rev. C, etc.
WriteEEPROM
Read-only field; displays the device’s write EEPROM status.
EPROM Size
Read-only field; displays the size (in bytes) of the device’s
EPROM.
EEPROM Size
Read-only field; displays the size (in bytes) of the device’s
EEPROM.
DRAM Size
Read-only field; displays the size (in bytes) of the device’s
DRAM.
Chassis Type
Read-only field; displays the device’s chassis type. For exam-
ple, m2813.
Backplane Type
Read-only field; displays the device’s backplane type.
Backplane Rev
Read-only field; displays the device’s backplane revision num-
ber.
PowerSupply Type
Read-only field; displays the device’s power supply type. If
the chassis has a redundant backplane, the agent returns
redundantCapable (5).
Flash EPROM
Read-only field; displays the operational status of the flash
device of the agent.
❏
OK — the flash device is operational.
❏
Fail — the flash device configuration on the board is
not valid or the flash EEPROMs on the board have
failed.
PowerSupply
Read-only field; displays the chassis’ power supply status.
Fan
Read-only field; displays the status of the chassis’ cooling fan.
Retiming
Read-only field; displays whether the device has retiming
turned on or off.
Security
Read-only field; displays if the security features for the device
are active or inactive.
Bay PM book Page 5 Wednesday, August 27, 1997 1:23 PM
