Asante IntraSpection Bay Networks System 2000 User Manual Download Page 19

Page: 19 / 66

Selecting the Device for Management

Page 3-5

Selecting the Device for Management

A Bay 28xx device can be managed at different levels; that is, at the
device, group, and/or port level.

For example, if a group is selected and you select the

Graph

menu, sta-

tistics for that group (single module) are displayed. If the device is
selected and you select

Graph

, statistics for the device (entire hub

stack) are displayed.

Selecting an Item

Deselecting an Item

Target Item

Action

Device (entire hub stack)

Do not click anything on the front panel
image.

Group (single module)

Click once on the group.

Port

Click once on the port.

Target Item

Action

Device

Click once on a group or port.

Group

Click again on the selected group.

Port

Click again on the selected port.

Bay PM book Page 5 Wednesday, August 27, 1997 1:23 PM

Summary of Contents for IntraSpection Bay Networks System 2000



































































Search results

Summary of Contents for IntraSpection Bay Networks System 2000

Reviews:

Related manuals for IntraSpection Bay Networks System 2000

Brands by name

Popular brands

Asante IntraSpection Bay Networks System 2000, User Manual

Search results

Summary of Contents for IntraSpection Bay Networks System 2000

Reviews:

Related manuals for IntraSpection Bay Networks System 2000

Brands by name

Popular brands