Asante IntraSpection Bay Networks System 2000 User Manual Download Page 13

Page: 13 / 66

Installing a Personality Module

Page 2- 3

▲

Important:

This window should be pointing to

the directory that contains the IntraSpection
(websuite.exe) program. If it is not, click

Browse

and locate that directory.

Click

∆

Note:

A “Select Database” window may appear.

If it does, select

vendor.mdb

, then click

∆

Note:

A “Updating IntraSpection System Files”

window may appear, if it does, click

The installer program installs both Personality Mod-
ules into the IntraSpection Application Server.

Installation is complete when the “Installation Com-
pleted Successfully” dialog box appears.

Start the IntraSpection Application Server, following
the guidelines below:

❏

Windows NT 3.51 users: double-click the

IntraSpection

icon (located in the Programs

group).

❏

Windows NT 4.0 users: open the

Start

menu, select

Programs

, then

IntraSpection

For information on accessing the Personality Modules’
Device Pages and performing some basic management
functions, see Chapter 3, “Management.”

Bay PM book Page 3 Wednesday, August 27, 1997 1:23 PM

Summary of Contents for IntraSpection Bay Networks System 2000



































































Search results

Summary of Contents for IntraSpection Bay Networks System 2000

Reviews:

Related manuals for IntraSpection Bay Networks System 2000

Brands by name

Popular brands

Asante IntraSpection Bay Networks System 2000, User Manual

Search results

Summary of Contents for IntraSpection Bay Networks System 2000

Reviews:

Related manuals for IntraSpection Bay Networks System 2000

Brands by name

Popular brands