Asante IntraSpection Bay Networks System 2000 User Manual Download Page 43

Page: 43 / 66

Configuration

Page 4-3

Configuration

This menu is not a management option; it is a title for the sub-menus
listed below it. This menu CANNOT be selected.

Identify

This menu allows you to view and configure identification information
for the device.

Table 4-2 describes each field in the Identify menu.

∆

Note:

For instructions on using this menu, see “Con-

figuring Identification Information” on page 3-11.

Table 4-2 Identify Menu

Field

Description

Physical Address

Read-only field; displays the device’s hardware address.

Object ID

Read-only field; displays the device’s SNMP identifying num-
ber.

Description

Read-only field; displays a description of the device.

Name

Configurable field; assigns a name to the device.

Note: A maximum of 254 characters (including spaces) is
allowed.

Location

Configurable field; assigns a location (where the device is
physically located).

Note: A maximum of 254 characters (including spaces) is
allowed.

Contact

Configurable field; assigns a name of the person responsible
for the device.

Note: A maximum of 254 characters (including spaces) is
allowed.

Up Time

Read-only field; displays the amount of time (in days, hours,
minutes, and seconds) the device has been operational since
the last time it was off-line.

Interfaces

Read-only field; displays the number of network interfaces
present on the device.

Bay PM book Page 3 Wednesday, August 27, 1997 1:23 PM

Summary of Contents for IntraSpection Bay Networks System 2000



































































Search results

Summary of Contents for IntraSpection Bay Networks System 2000

Reviews:

Related manuals for IntraSpection Bay Networks System 2000

Brands by name

Popular brands

Asante IntraSpection Bay Networks System 2000, User Manual

Search results

Summary of Contents for IntraSpection Bay Networks System 2000

Reviews:

Related manuals for IntraSpection Bay Networks System 2000

Brands by name

Popular brands