Page 3-5
Installing Network Specific Drivers
9
Change to the network drive (usually F) and log in to your net-
work.
∆
NOTE:
NETX.EXE
(dated 930217) will work with
DOS
6.0
or lower version only. You will need
NETX.EXE
(dated 931117) to work with
DOS 6.22
.
∆
NOTE:
If you choose to use the Netware Client Install
program, follow the instructions for Netware 4.x Client
Installation document.
∆
NOTE:
Remove the line
LASTDRIVE=Z
from your
CON-
FIG.SYS
file, if you use
NETX
. If you use
VLM LAST-
DRIVE=Z
is required in your
CONFIG.SYS
file.
Settings for
SPEED
and
DUPLEX MODE
in
NET.CFG
AUTODETECT
AutoDetect Linespeed,Media
LINESPEED 10M_TP_FD
10Mbps Full Duplex Mode.
LINESPEED 100M_TX_FD
100Mbps Full Duplex Mode.
LINESPEED 10M_TP
10Mbps Half Duplex Mode.
LINESPEED 100M_TX
100Mbps Half Duplex Mode.
