2
Installing the Asanté PCI Adapter
Installing the Adapter
The following instructions explain how to install the Asanté PCI adapter.
∆
Note
: You do not need to set any jumpers or switches
on the adapter.
1
Turn the power off and remove the computer cover.
▲
Important:
A network adapter is sensitive to static elec-
tricity and must be handled carefully. If you do not han-
dle the adapter properly, you can damage it and/or your
system.
2
Align the adapter’s edge connector with a PCI bus slot.
▲
Important:
The PCI bus slot used must support bus-
mastering operations.
3
Push the adapter down into the slot until the adapter locks into
place as shown below.
4
Replace the computer cover.