Page 3-11
Installing Network Specific Drivers
Power Macintosh Open Transport Driver
The Driver Disk includes Asanté’s Open Transport PCI device driver for the
Power Macintosh. Asanté’s Open Transport driver supports AppleTalk and
TCP/IP protocols simultaneously.
This section explains how to install the Open Transport driver for the
adapter on your PCI-based Power Macintosh.
▲
Important:
To use the Driver Disk on your Power Mac-
intosh, make sure that you do not disable the System
Extensions during power-up and that PC Exchange is
enabled in the Extensions Manager.
1
Insert the Asanté Driver Disk into the floppy drive and double-
click the
AsantéFast Disk
icon.
2
Double-click on the
Power Macintosh
folder.
3
Double-click the
AsantéFast 10/100 PCI Rev B. Installer
icon
and click
OK
when the Installer banner appears.
4
The Easy Install dialog box appears.
▲
Important:
To properly install the Open Transport
driver, you must use the Installer program. Do not drag
the files to the System Folder; doing so may not install
the files properly.
5
Click the
Install
button.
The Installer program examines your Macintosh and installs the
appropriate driver.
6
Click the
Restart
button when the message appears stating that
the installation was successful.
After successfully installing the adapter and the driver, you need
to configure the AppleTalk control panels on the Macintosh.
7
Select
Control Panels
from the Apple Menu.
8
Select
AppleTalk
from the Control Panels submenu.