Page 3-2
Installing Network Drivers
Other Operating Systems
In general, the adapter supports a network operating system (NOS) that
works with NDIS and ODI drivers. For instructions on installing and config-
uring the adapter with other operating systems, refer to the INSTALL.TXT
files in each specific NOS subdirectory on the Driver Disk.
∆
Note
:
The same installed driver can be used for 10Mbps
or 100Mbps operation with the AsantéFast 10/100 PCI
Rev B. Adapter.
Installing Network Specific Drivers
Novell NetWare 3.12 Client
This section explains how to install Novell NetWare version 3.12 ODI client
software.
∆
NOTE:
If you want to use the Netware DOS Requester,
use the Novell Client Install Disks.
1
Create a directory named
NWCLIENT
on your C drive.
2
Insert the Asante PCI Network Driver Disk into drive A and
change to the subdirectory
NETWARE\NW312\CLIENT
.
3
Copy the following files from the Driver Disk to the
NWCLIENT
directory on your C drive:
LSL.COM
NET.CFG
L100.COM
4
You will need to download the following files from Novell:
IPXODI.COM
and
NETX.COM
.
5
Check your
CONFIG.SYS
file to make sure that the following line
appears:
DEVICE=C:\DOS\SETVER.EXE
assuming that
\DOS
is
the directory where you have all your
DOS
files including
SET-
VER.EXE
.
6
Remove the Asante PCI Network Driver Disk from drive A.