Page 3-4
Installing Network Drivers
Novell NetWare 4.x Client
This section describes how to install Novell NetWare 4.x ODI client software
to work with the AsantéFast 10/100 PCI Rev B. Adapter.
1
Create a directory named
NWCLIENT
on your C drive.
2
Insert the Asante PCI Network Driver Disk into drive A and
change to the subdirectory
NETWARE\NW4x\CLIENT.
3
Copy the following files from the Driver Disk to the
NWCLIENT
directory on your C drive:
LSL.COM
NET.CFG
L100.COM
4
You will need to download the following files from Novell:
IPXODI.COM
and
NETX.COM
.
5
Check your
CONFIG.SYS
file to make sure that the following line
appears:
DEVICE=C:\DOS\SETVER.EXE
assuming that
\DOS
is
the directory where you have all your
DOS
files including
SET-
VER.EXE
.
6
Remove the Asante PCI Network Driver Disk from drive A.
7
Restart your computer.
8
To run NetWare, type the following four commands (in the fol-
lowing sequence) at the
C:\NWCLIENT
prompt:
LSL
L100
IPXODI
NETX
