Installation, Operation and Maintenance Manual
【
H-A077-E-00
】
3-Way Ball valve Type 23 Electric actuated Type Z 15
～
50mm (½”-2”)
17
9. Support setting procedure
[
Level plumber
]
1) Spread the rubber sheet on the pipe or flange, and secure pipe with U-type clamp.
[
Perpendicular plumber
]
1) Spread the rubber sheet on the pipe or flange,
and secure pipe with U-type clamp.
2) Spread the rubber sheet under the actuator, and
support with stand.
- When installing a pipe support by means of a U-type clamp or something similar, take care
not to over-tighten. (Excessive force may damage the pipe.)
- Do not subject the valve to pump vibrations. (The valve may be damaged.)
- Be sure to conduct a safety check on all hand and power tools to be used before beginning
work.
- When valve supporting work, wear personal protective equipment appropriate to the contents
of work. (Failure to do so may cause an injury.)
Necessary
items
● Spanner wrench
● U-type clamp (with bolt)
● Rubber sheet
U-type clamp
Stand
Rubber seat
- Supporting example
(Socket end, Threaded end, Spigot end)
- Supporting example (Flanged end)
U-type clamp
Stand
Rubber seat
U-type clamp
Stand
Rubber seat
- Supporting example
Stand
