Aruba AP 80 Outdoor Wireless Access Point
29
Installation Guide
Troubleshooting
Appendix A
Resetting the AP 80 to Factory Defaults
In the event you need to reboot the Access Point with the configuration shipped
from the factory, you must access and press the reset button. To access the reset
button, remove the back of the Aruba AP 80 case. The reset button is located on
the system board next to the Ethernet port. To reset the AP 80 configuration to
factory default, press and hold down the reset button while power cycling the
device.
C
AUTION
:
Only properly trained personnel should perform this task.
Furthermore, this procedure should be performed only in a
staging facility. Do not perform a reset in the field.
