Aruba AP 80 Outdoor Wireless Access Point
19
Installation Guide
AP Deployment
Chapter 3
3.
Insert the power cable plug directly into the standard AC receptacle on the
power injector.
4.
Plug the other end of the power cable into a grounded, 3-pin socket, AC
power source.
N
OTE
:
For International use, you may need to change the AC line cord. You must
use a line cord set that has been approved for the receptacle type in your
country.
5.
Check the LED on top of the power injector to be sure that power is being
supplied to the wireless Access Point through the Ethernet connection.
ENET
AP
3
1
Ethernet cable
to AP80
4
Power LED
Indicator
AC Power Cord
2
Ethernet cable
from LAN switch
