Aruba AP-80M Installation Manual Download | Manualshive

Page: 2 / 52

background image

ii

Aruba AP 80 Outdoor Wireless Access Point

0500125-03

Installation Guide

January 2006

Copyright

© 2006 Aruba Wireless Networks, Inc. All rights reserved.

Aruba Networks and Aruba The Mobile Edge Company are trademarks of Aruba

Wireless Networks, Inc.

Specifications are subject to change without notice.

Trademarks

Sygate On-Demand Agent and Sygate Enforcer are trademarks of Sygate
Technologies.

All other trademarks or registered trademarks are the property of their respective
holders.

Legal Notice

The use of Aruba Wireless Networks, Inc. switching platforms and software, by
all individuals or corporations, to terminate Cisco or Nortel VPN client devices
constitutes complete acceptance of liability by that individual or corporation for
this action and indemnifies, in full, Aruba Wireless Networks, Inc. from any and all
legal actions that might be taken against it with respect to infringement of
copyright on behalf of Cisco Systems or Nortel Networks.

Warranty

This product is protected by the standard Aruba warranty of one year parts/labor.
For more information, refer to the ARUBACARE SERVICE AND SUPPORT TERMS
AND CONDITIONS.

N

OTE

:

Altering this device (such as repainting it) voids the warranty.

«
1
2
3
4
...
»

Summary of Contents for AP-80M





















































Reviews:

No comments

Related manuals for AP-80M

Brand: IDENTEC SOLUTIONS Pages: 17

Brand: D-Link Pages: 3

Brand: D-Link Pages: 2

Wireless VPN Router DI-824VUP

Brand: D-Link Pages: 157

Brand: Inscape Data Pages: 29

Brand: Hantech Pages: 13

Brand: LevelOne Pages: 42

Brand: Aruba Pages: 15

BLUESOCKET 3045

Brand: ADTRAN Pages: 2

Brand: SENAO Pages: 2

Brand: PHICOMM Pages: 58

Brand: Air Live Pages: 50

Brand: USR IOT Pages: 66

Brand: u-blox Pages: 31

NetGenie NG11EH

Brand: Cyberoam Pages: 16

Brand: Ebyte Pages: 31

Brand: mobilerepeater Pages: 8

Brand: Ubiquiti Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands