AP Deployment
Chapter 3
16
Aruba AP 80 Outdoor Wireless Access Point
0500125-03
Installation Guide
January 2006
Connect Ethernet Cable to the AP
1.
Attach the Ethernet cable to the Ethernet port on the wireless Access Point.
(See figure above.)
N
OTE
:
The Ethernet cable included with package (AP-AC-80-1, indoor Power
Injector) is 50 meters (164 feet) long. Use the connector pinout
information in Appendix B.
N
OTE
:
The combined cable lengths connecting the store-and-forward Ethernet
device, the PoE injector, and the AP must not exceed 90 meters (295
feet).
2.
For extra protection against rain or moisture, apply weatherproofing tape (not
included) around the Ethernet connector.
3.
Be sure to ground the unit with an appropriate grounding wire (not included)
by attaching it to the grounding screw on the unit.
C
AUTION
:
Be sure that grounding is available and that it meets local and
national electrical codes. For additional lightning protection,
use lightning rods, lightning arrestors, or surge suppressors
C
AUTION
:
Be sure that grounding is available and that it meets local and
national electrical codes. For additional lightning protection,
use lightning rods, lightning arrestors, or surge suppressors
