Aruba 2930F 24G 4SFP Page 73 Installation And Getting Started Manual Download

Page: 73 / 76

Accessing Hewlett Packard Enterprise Support

• For live assistance, go to the Contact Hewlett Packard Enterprise Worldwide website:

http://www.hpe.com/assistance

• To access documentation and support services, go to the Hewlett Packard Enterprise Support Center website:

http://www.hpe.com/support/hpesc

Information to collect

• Technical support registration number (if applicable)

• Product name, model or version, and serial number

• Operating system name and version

• Firmware version

• Error messages

• Product-specific reports and logs

• Add-on products or components

• Third-party products or components

Accessing updates

• Some software products provide a mechanism for accessing software updates through the product interface.

Review your product documentation to identify the recommended software update method.

• To download product updates:

Hewlett Packard Enterprise Support Center

www.hpe.com/support/hpesc

Hewlett Packard Enterprise Support Center: Software downloads

www.hpe.com/support/downloads

Software Depot

www.hpe.com/support/softwaredepot

• To subscribe to eNewsletters and alerts:

www.hpe.com/support/e-updates

• To view and update your entitlements, and to link your contracts and warranties with your profile, go to the

Hewlett Packard Enterprise Support Center

More Information on Access to Support Materials

page:

Chapter 8

Support and other resources

Chapter 8 Support and other resources

Summary of Contents for 2930F 24G 4SFP













































































Search results

Summary of Contents for 2930F 24G 4SFP

Reviews:

Related manuals for 2930F 24G 4SFP

Brands by name

Popular brands

Aruba 2930F 24G 4SFP, Installation And Getting Started Manual

Search results

Summary of Contents for 2930F 24G 4SFP

Reviews:

Related manuals for 2930F 24G 4SFP

Brands by name

Popular brands