The Aruba 2930F 8G PoE+ 2SFP+ Switch (JL258A) adapter power cord includes a latch on its
plug. Be sure to release the latch on the plug before removing the adapter power cord.
Figure 19: Aruba 2930F 8G PoE+ 2SFP+ Switch power plug latch
2.
Re-check the LEDs during self test. See
LED behavior:
.
3.
Use the included cable tie to secure the power cord to the switch.
Figure 20: Using the cable tie on the 2930F 24-port and 48-port switches
An optional power shelf (JL312A) can be attached to the Aruba 2930F 8G PoE+ 2SFP+ Switch to
hold the AC/DC power adapter. For instructions on how to install this accessory, see the included
documentation.
(Optional) Connect a management console
The switch has a full-featured, easy-to-use console interface for performing switch management tasks including:
Chapter 2 Installing the switch
37
