When mounting the switch on top of a surface, it should be positioned such that items (papers, etc)
are not likely to be put on top of it or next to it, blocking the ventilation holes.
Figure 13: Mounting the Aruba 2930F 8G PoE+ 2SFP+ Switch on a horizontal surface
Wall and under-table mount options
You can mount the Aruba 2930F 8G PoE+ 2SFP+ Switch under a table or on a wall with the network ports facing
up.
For safe operation, do not install the switch with side ventilation facing down. For under table
mounting, the top ventilation must be facing down (see the figure, below).
The switch should be mounted only to a wall or wood surface that is at least 1/2-inch (12.7 mm)
plywood or its equivalent.
To mount the Aruba 2930F 8G PoE+ 2SFP+ Switch, follow these steps:
32
Aruba 2930F Switch Series Installation and Getting Started
Guide
