Aruba Networks Amigopod 3.7, Deployment Manual

Page: 61 / 438

Amigopod 3.7 | Deployment Guide RADIUS Services | 61
.
If you have chosen a specific vendor, the form will display additional options:
The Address option allows you to set the IP address for the NAS, as it will be visible to the guest network.
The Secure Login option controls whether the NAS login should be performed using HTTP or HTTPS.
When the Dynamic Address check box is selected, the NAS login can be performed using the controller’s IP
address as provided to the client. For example, when using an Aruba Networks controller, the controller
performing the redirect sends its IP address using the “switchip” parameter. To use this address for the
guest login, enable the Dynamic Address check box.
The second section requires you to specify the behavior of the Web login form. There may only be some
fields displayed here, depending on which of the Vendor Settings you have chosen.
Changing the vendor settings may overwrite any customizations you have made to the Header HTML and Footer
HTML.
The vendor’s address or hostname must be available to the guest. The DNS may differ for guests and the operator on
the LAN side. If you select Aruba Networks in the Vendor Settings field, then the Aruba controller’s IP address
(hostname or IP address only)
must be entered in the Address field as no other entries are supported.
When using this option, the guest’s username and password credentials will be sent to a value provided in the URL.
As this is a potential security hazard, enter the known IP addresses of the controllers in your network in the Allowed
Dynamic and Denied Dynamic fields, to prevent an information leak vulnerability that could be exploited by guest
users on your network.