Arturia MiniFreak, User Manual

Page: 103 / 112

15.2.1. Utility > MIDI
•
Input and Output Channels
: sets the MIDI Channels the MiniFreak will respond to
and transmit.
•
MIDI From and MIDI To
: sets whether incoming and outgoing data use USB,
5-Pin MIDI DIN jacks, or both.
• Local Control : sets whether or not the MiniFreak responds to its own keyboard
and user interface or only to external MIDI messages.
• MIDI Seq/Synth : determines routing of keyboard data vs. external MIDI data for
the Arpeggiator/Sequencer vs. the MiniFreak's synth engine.
•
Knob Send CC
: sets whether or not the MiniFreak's front panel knobs send MIDI
Control Change data.
•
Program Change
: sets whether or not the MiniFreak sends and receives Program
Change messages via MIDI when you select a new Preset.
Further information about all of these settings can be found in the Chapter on MIDI and
External Control [p.101] .
15.2.2. Utility > Sync
•
Metronome
: turns the Metronome on and off. Can also be activated using
Shift +
Click
on the
Tempo
knob.
•
Rec Count-In
: sets whether recording begins immediately, or after a 1-bar count-
in.
• Metronome Level : sets the loudness of the Metronome click.
• Clock Source : determines the source of clock sync data, whether internal or via
USB, MIDI, or the rear-panel Clock In jack – or a prioritized auto-sensing routine.
•
Transport Receive
: sets whether or not the MiniFreak accepts external transport
control.
•
Clock In and Clock Out Type
: determines the number of pulses per quarter note
(PPQ) the Clock In and Clock Out jacks receive and send.
• Global Tempo : determines whether a Preset change also changes the Tempo to
the new Preset's value, retains a global value, or changes when the transport is
stopped.
Further information about all of these settings can be found in the Chapters on the
Arpeggiator and Sequencer [p.83] and External Control [p.101] .
Arturia - User Manual MiniFreak - The Utility Menu 98