Arturia MiniFreak User Manual Download Page 88

Page: 88 / 112

14. THE ARPEGGIATOR AND SEQUENCER

14.1. Common Features

The MiniFreak provides both a Sequencer mode as well as an Arpeggiator mode which offer

shared features, let's take a look at them :

14.1.1. Transports

You can find them on the left side of your unit's touch buttons.

These control the playback of the Arp and Seq according to internal tempo.

14.1.2. Tempo

The

Tempo

Encoder allows you to set the internal tempo of the MiniFreak, if no clock is

provided.

The range of the supported tempos are from 30 BPM to 240 BPM.



When using an external clock source, do note that the tempo cannot be edited.

The MiniFreak stores the tempo on a per preset basis so recalling a Seq or Arp to the original

tempo is super easy !

14.1.3. Time Division

You can set the time division of the Sequencer or Arp playback using the Tempo/Swing

encoder. To activate Time division, click the encoder and set the desired value.

Arturia - User Manual MiniFreak - The Arpeggiator and Sequencer

Summary of Contents for MiniFreak

















































































































Search results

Summary of Contents for MiniFreak

Reviews:

Related manuals for MiniFreak

Brands by name

Popular brands

Arturia MiniFreak, User Manual

Search results

Summary of Contents for MiniFreak

Reviews:

Related manuals for MiniFreak

Brands by name

Popular brands