14.3.3. Real-Time Recording
While step recording is requiring the unit to be in Stop mode, the Real-time recording mode
will allow you to play the sequence manually while in Play mode, to populate the steps of
the sequencer. While more immediate, this can also be a less precise way to record your
sequences.
To enter Real-time recording, make sure that the unit is in Play mode with the sequencer
activated and press
Record
. The unit will then be in record mode and any note pressed will
be added to the grid, this mode will record Pitch, Note length and velocity for each note that
is pressed.
Once your sequence is recorded, you can exit record mode and play it back.
14.3.4. Editing your sequence
Once your sequence has been recorded or programmed, you can still manually edit it.
Action wanted
To do
Results
Enable a step
Press an unlit step button
If the step was empty, the step is filled with
a default C3 note
Disable a step
Press a lit step button
The step is muted. Pressing it again will
recover its previous content
Page navigation
Press a Page button
Page is selected and its steps are accessible
on the step buttons
Extend sequence
Press Shift + Page button
Copies the current sequence until the last
step of the selected page
Copy / Paste /
Erase a step
Hold Off/Seq/Arp button, then select
one or multiple steps
Copies / Pastes / Erases the selected steps
Copy / Paste /
Erase a page
Hold Off/Seq/Arp button, and press one
of the Page buttons
Copies / Pastes / Erases the selected page
91
Arturia - User Manual MiniFreak - The Arpeggiator and Sequencer
Summary of Contents for MiniFreak
Page 1: ...USER MANUAL _MINIFREAK...
