5.2.16. Audio In (Osc 1 only)
Osc 1 can route any audio signal from the Audio In Jack into MiniFreak's signal flow. This
audio is digitalized, then processed by a wavefolder and a decimator, with digital noise
added.
A
decimator throws away input samples at a designated ratio, for example saving one
sample out of every five or ten.
Fold
: controls the depth of the wavefolder effect. Note that when Decimate is set to 0, this
acts strictly as an input level control.
Decimate
: controls the amount of decimation and also follows the keyboard tracking.
Noise
: sets the level of added noise.
You can then adjust the audio input level in the
Utility/Audio/Audio In Gain
to avoid clipping.
When set correctly the
Fold
knob can be used as level control. If you can't hear your input
signal make sure that a key is pressed to open the VCA and let the audio through to the
Master output.
Tips :
• You can set the MiniFreak out as an input source to use feedback modulation.
• The Audio Input is especially fun to use with drumloops and
shaper
+
modulations
+
fx
. Or with Multi mode or comb filters.
• Lastly do note that the audio input cannot be accessed in Paraphony mode.
33
Arturia - User Manual MiniFreak - The Digital Oscillators
Summary of Contents for MiniFreak
Page 1: ...USER MANUAL _MINIFREAK...
