ARTURIA – Jup-8 V – USER MANUAL
40
4
THE DIFFERENT MODULES IN DETAILS
4.1
The original interface
The “Jup-8 V” interface takes on all the original parameters and characteristics
of the synthesizer it is based on. Likewise, the 44 factory presets of the original
machine are included (these cannot be deleted).
The Jup-8 V interface
The Jup-8 V consists of:
2 oscillators (“ VCO 1 and 2 ”) in which the second can equally be used
as a source of modulation
1 mixer for the volume of the 2 oscillators.
1 High pass filter (“ HPF “) 6dB/oct non-resonant
1 low pass resonant filter (“ VCF “) 12/24dB/oct
1 amplifier
2 envelopes dedicated to filter and amplitude modulations
1 LFO (low frequency oscillator)
modulation section (WHEEL MOD) dedicated to the LFO
4.1.1
The oscillators (“VCO 1 and 2”)
There are two oscillators.
The oscillator controls the basic frequencies and timbres of the Jup-8 V with the
frequency settings, choice of waveform, and the pulse width associated to the
square waveform. These settings are made either with various knobs (static
settings) or by the means of the modulation sections. These can be activated
in the “LFO-MODULATION” section (monophonic modulation by the LFO) or the
“CROSS MOD” (polyphonic modulation using the frequency of oscillator 2 on
oscillator 1).