ARTURIA – Jup-8 V – USER MANUAL
52
4.1.13
Play mode section The play modes selection (“KEY MODE”)
The methods of playing indicate the distribution of the programs on the
keyboard. They are 3 selectable configurations that can be set to: “ON/OFF”:
DUAL: Two selected programs on the LOWER and UPPER part can be
played simultaneously on the keyboard. The polyphony is then divided
by two.
SPLIT: Two selected programs are assigned the LOWER and UPPER part
of the keyboard. The polyphony is then divided between the two
selected programs.
WHOLE: A single program is assigned to the entire keyboard range.
Key modes
4.2
Step Sequencer
The sequencer is a 32-step sequencer.
It allows the creation of several melodic lines (when one of the three available
modulations is affecting the pitch of the VCO) as well as creation of dynamic
modulations of other parameters such as the cutoff frequency of the VCF or
the width of the VCO square waveform.
Click on the “Modulations” tab, then, click on the “Sequencer” button to bring
up the interface.
