ARTURIA – Jup-8 V – USER MANUAL
56
4.3
Galaxy
The galaxy module creates very complex modulations with the interaction of
3 LFOs.
The first 2 LFOs can each modulate a different parameter on the X/Y axes,
represented in the framework of the interface. A third LFO allows modifying the
alpha angle between the X and Y axes.
Each of these 3 LFOs have two parameters:
SHAPE: Selection screen for the waveform of the LFO and X/Y axis
(“Sine”, “Tri”, “Saw” and “Square”) and “Sine”, “Tri” and “Saw” for the
third LFO.
RATE: Knob to set the modulation frequency of the LFO.
ANGLE: Knob to set the rotation angle of the X/Y axis manually.
Three modulation outputs can be connected. For each, the following
modulation destinations are available:
None: Nothing is connected
VCO1 Pitch
VCO1 FREQUENCY
VCO2 Pitch
VCO2 FREQUENCY
VCO1 PW: Pulse width of the square wave form of VCO1
VCO2 PW: Pulse width of the square wave form of VCO2
HPF Cutoff: Frequency of the high pass filter
VCF Cutoff: Frequency of the low pass filter
VCF Res: Resonance of the low pass filter
VCA: Volume of the VCA
A reset setting of the movements for the three LFO's by a played note is
available by using the “RETRIG” button.
The Galaxy module
