ARTURIA – Jup-8 V – USER MANUAL
64
4.5.3
Reverb
The reverb effect creates a very dense series of decaying echoes in the sound,
simulating the sound's performance within a three-dimensional space.
FEEDBACK: Knob to set feedback time for the reverb
DAMPING: Knob to set the rate at which high frequencies that are rolled
off as the reverb decays
DRY/WET: Knob to set the balance between the original signal and the
output of the effect
OUTPUT: Knob to set the output volume of the reverb
A visual interface shows the characteristics of the REVERB for convenient
editing.
The “BYPASS” button allows deactivating the “REVERB” effect.
The Reverb effect
4.5.4
Dual Phaser
The Phaser unit provides a classic phasing sound similar to analog effects used
in the 70's.
SWEEP GENERATOR 1/2: Selection of the waveforms for the modulations
of phasers 1 and 2:
o
Sin
o
Square
o
Saw
o
Triangle
RATE 1/2: Knob to set the rate for Phaser 1 /2
DEPTH 1/2: Knob to set the depth of the modulation for Phaser 1/2
FEEDBACK 1/2: Knob to set feedback time for Phaser 1/2
DRY/WET: Knob to set the balance between the original signal and the
output of the effect
OUTPUT: Knob to set the output volume of the DUAL PHASER
SWEEP SYNC: Button allows activating the synchronization of the two
modulation frequencies.
INVERT: Button allows inverting the phase of the modulation frequencies
BYPASS: Button allows deactivating the “DUAL PHASER” effect.