ARTURIA – Jup-8 V – USER MANUAL
38
An LFO
1 amplifier (VCA) allowing amplification of the signal between the filter
to the stereo output.
Two envelopes (ADSR) to modulate the low pass filter and the VCA
The synthesis parameters
3.4.2
Overview of the (Advanced) Modulations section
In the extension panel, there are sources of additional modulations allowing
an extension of the playing possibilities and of the synthesis. This section offers
4 modules: GALAXY, SEQUENCER, KEYBOARD and EFFECTS.
3.4.2.1
The GALAXY module
Galaxy allows creating very complex modulations thanks to the interaction of 3 LFOs. The
first two LFOs allow inter-modulation with a different parameter on the X and Y axes. They
are represented on the graphical interface of the unit. A third LFO allows modifying the
alpha angle between the 2 X and Y axes.
The GALAXY module
3.4.2.2
The SEQUENCER module
The sequencer is accessible by clicking on the “SEQUENCER” tab, situated on
the expansion panel.
The sequencer is a 32-step “step sequencer”. It allows the creation of several
melodic lines (when one of the three available modulations is affecting the
frequencies of the VCO) as well as creation of dynamic modulations of other
parameters such as the cut-off frequency of the VCF or on the width of the
square waveform of the VCO's.
