background image

                                                                                                          

 

 
 

n.v  Jobetrade s.a                    

www.artsound.be

                   [email protected]        R1.1  ENG            

14/14 

6.4 ‘Party mode’ 

 

The so-called party-mode enables zones 2 to 4 to be linked to zone 1. In 

this way it is possible to turn two or more zones into a single zone. The 

individual controls for the connected zones therefore work for these 

connected zones. In this way, it is possible to create the same mood in all 

the different zones in your home. 

E.g. if zone 2 is linked to zone 1, raising the volume in zone 2 will raise the 

volume in zone 1 and vice-versa. 

 

How to switch on the party-mode? 

 

° Press briefly on the AUX button of the control which 

you would like to put into party mode (zone 2..4) in 

order to turn the zone on. 
° Keep the AUX button pressed in, until the music in this 

zone briefly disappears (approx. 5 sec). 

° This zone is now connected to zone 1  

 

How to switch off the party-mode? 

 

Turning the party-mode off is identical to turning it on (see above).

 

7. Warranty conditions 

 

2 year warranty from the date of manufacture. 

The warranty is limited to the repair of replacement of the defective 

material insofar as this defect is a result of normal use and the device has 

not been damaged. 

 

Artsound is not responsible for any other costs that ensue as a result of the 

defect (e.g. transport). For details, please consult our general terms and 

conditions of sale. 

 

 

Summary of Contents for ART 2.4















Reviews: