Manual No. 725755
ART’S-WAY MANUFACTURING COMPANY, INC.
10
SAFETY INSTRUCTIONS
HYDRAULIC SAFETY
SAFETY
INSTRUCTIONS
Follow all operating, maintenance, and
safety instructions found in this Manu-
al.
Make sure components in
the hydraulic system are kept
clean and in good working condition.
0
Relieve pressure from the hydraulic system
before servicing or disconnecting from the
tractor.
Keep all hydraulic lines, fittings, and
couplers tightly secured and free of leaks.
Replace any worn, cut, abraded, flattened,
or crimped hoses.
Do not make any temporary repairs to the
hydraulic lines, fittings, or hoses using
tape, clamps, or cement. The hydraulic
system operates under extremely high
pressure and temporary repairs may fail suddenly
and create a hazardous/dangerous situation.
Wear proper hand and eye
protection when searching
for a high-pressure
hydraulic leak. Use a piece
of wood or cardboard as a backstop instead of
hands to identify and isolate a leak. If injured by a
concentrated high-pressure stream of hydraulic
fluid, seek medical attention immediately. Serious
infection or toxic reaction can develop if hydraulic
fluid penetrates the surface of the skin.
Before applying pressure to the system,
make sure all components are tight and
that the hydraulic lines, hoses, and
couplings are not damaged.
TRANSPORTATION SAFETY
SAFETY
INSTRUCTIONS
Follow all operating and safety instructions found in
this manual when transporting this equipment.
Make sure the spreader complies with all local
regulations regarding transporting equipment on
public roads and highways.
Make sure the Slow Moving Vehicle (SMV)
emblem and all lights and reflectors
required by local highway and transportation
authorities are properly in place, clean, and
clearly visible to traffic.
Do not allow riders on any machinery
during transport.
Make sure the spreader is securely attached to the
tractor and install a safety chain to the spreader.
Make sure the tractor brake pedals are latched
together.
Do not exceed 20 mph (32 km/h) when transporting
the spreader. Always reduce speed on rough roads
and surfaces, or when going down inclines.
Use caution when turning and always use the
turn signals on the tractor to indicate your turning
intentions to the other traffic.
The weight of the trailed machine should NEVER
exceed the weight of the towing vehicle.
Check all clearances carefully whenever the
machine is towed.
Lower the elevator into the transport position
before transporting the spreader on the highway .
Stay away from overhead obstructions and
power lines during transport. Electrocution
can occur even without direct contact.
STORAGE SAFETY
SAFETY
INSTRUCTIONS
Follow all operating and safety instructions found in
this manual when storing this equipment.
Store the spreader in an area away from
human activity.
Do not permit children to play on or around
the stored machine at any time.
Make sure that the spreader is stored in an area
with a firm and level base to prevent the machine
from tipping or sinking into the ground.
Block the wheels to prevent the machine
from rolling.