downtown
5
Installation guide
TABLES
29''H collaborative work tables
with architectural base and laminate gable
Step 1 :
Place all parts upside down to acces the underside.
Step 2 :
With the included hardware, screw the modesty panels into the
inserts of the laminate gable.
Step 3 :
Screw the modesty panels to the architectural base.
Step 4 :
With the included hardware, align the laminate gable to the end
of the surface, and screw these pieces together.
Step 5 :
Screw the architectural base and the modesty panels to the
surface.
Step 2
Step 3
Step 4
Bistro table
Remove the vertical cable conduit and install the electrical cable
of the multi-outlet inside the gable slot.
Lift the vertical cable
conduit to remove it.
Step 1 :
Screw the metal leg to the surface using the pre-drilled holes.
Legs positioning under the surface.
Bistro table with multi-outlet
Step 1 :
Place all parts upside down to acces the underside.
Step 2 :
With the included hardware, screw the modesty panels into the
inserts of the laminate gable.
Step 3 :
Screw the modesty panels to the other leg or to the storage.
Step 4 :
With the included hardware, align the laminate gable to the end
of the surface, and screw these pieces together.
WARNING
If there is a multi-outlet with the surface, make sure that the
laminate leg with vertical cable conduit is on the same side as
the multi-outlet.
Step 5 :
Screw the gables (or storage) and the modesty panels to the
surface.
Step 2
Step 3
Step 4
Vertical cable
conduit must be on
the same side as the
multi-outlet.
!
Occasional table - tripod base
