downtown
11
DOWNTOWN CONNECTION
Installation guide
Step 6 :
Connect the electronic box.
- HDMI monitor cable (output)
Place the monitor cable through the grommet and the technical
panel (p.7). Plug the cable into the monitor.
- Electrical cable (orange)
Secure the transformer to the technical panel using the bracket
included (no pre-drilled holes). Plug the cable into the power bar
and use a cable fastener to hold the excess cable.
Transformer with bracket
Step 7 :
Install the grommet in the surface. An installation guide is
included.
Step 5 :
Assemble the cable access module.
- Insert the 4 HDMI data sharing cables into the cable access
module and keep them in place using the black plastic rings
included.
- Insert the electrical outlet into the cable access module and
plug into the power bar. Use the cable fastener to hold the
excess cable.
- Insert the communication punch-out plate.
Black plastic ring
Electrical outlet
Communication
punch-out plate.
Step 8 :
Connect the monitor. Pass the monitor cable through the
grommet using the interior access of the technical panel. Plug
the cable in the power bar.
PRIVACY SCREEN
Legs
Bracket for privacy screens
Shelf
The installation of legs is the same for all privacy screens.
Angled-top
Vertical
Screen with shelf
Legs positioning :
Angled-top
Vertical and screen with shelf
center
center
Align and screw the legs using the pre-drilled holes under the
metal structure.
Bracket for joining 2 upholstered screens, vertical or angled-top.
Installed at the top of the screen.
Screw the shelf on top of the screen using the inserts.
Allen key
!
Angled-top panel
the longer part of the
leg must be in the front
of the panel, under the
angled-top.
