downtown
10
DOWNTOWN CONNECTION
Installation guide
Metal support
Cable access module
Transformer
Cable fastener
Power bar
Grommet
Electronic box with connections
Step 1 :
Screw the HMDI cable access module under the surface using the
pre-drilled holes. (6 screws to install)
Cable access module.
Step 3 :
Screw the electronic box with cables downward into the technical
panel using the pre-drilled holes (4 screws to install).
Electronic box
Step 4 :
Line up the black metal support with the pre-drilled holes on the
technical panel. Place a cable in each of the slots.
Attach the support with 2 screws.
Metal support
Step 2 :
Screw the power bar under the surface, in front of the cable access
module. Place the electrical cable through the grommet and inside
the technical panel until it comes out the bottom. Plug it into the
wall.
Power bar
Installation of Downtown Connection under a Mediacom table with metal leg or Bistro Mediacom table
