manualshive.com logo in svg

artisan MDR, User Manual

Share
Download
artisan MDR User Manual Download Page 95

 

88 

MDR User Guide 

 

S_mdr_STREAM_DOWN 0x5550002D 

TCP/IP stream is 
down. 

The TCP/IP stream between the MDR Server and MDR 
Client is down. The MDR Server may have shut down 
the connection due to an internal or communication 
problem. 

S_mdr_SYSTEM_CORRUPT 0x5550002E 

MDR system 
corrupted. 

The MDR system is corrupted. This is a critical error. 
Please contact VMETRO. 

S_mdr_TRANSFER_NOT_STARTED 0x5550002F 

Transfer not 
started. 

There is no transfer in progress. This indicates that the 
transfer has not been started or is already finished. 

S_mdr_TRANSFER_PREMATURE_END 0x55500030 

Transfer finished 
prematurely. 

The MDR has stopped transferring data prematurely 
(I.e. before having transferring the entire amount of 
recording data) because an error has occurred. If the 
transfer was a recording then the recording has been 
truncated and it contains the recorded data so far (Re-
cording stored and recorded). 

S_mdr_TRANSFER_STOPPED 0x55500031 

Transfer was 
stopped. 

The transfer phase has been stopped by the MDR Shell 
command 

stop

 (or by a call to the MDR API function 

StopTransfer

). If the transfer was a recording then 

the recording has been truncated and it contains the 
recorded data so far (Recording stored and recorded). 

S_mdr_TRANSFER_TIMEOUT 0x55500032 

Transfer timed 
out. 

The MDR Server has not been able to transfer (record 
in this case) the entire recording size because the 
source: 

• 

Has not sent any data before a time greater than 
the time specified by the 

StartInputWait-

Time

 item (present in the configuration file 

mdr.ini

), 

• 

Has stopped sending data during a time greater 
than the time specified by the 

InputWaitTime

 

item (present in the configuration file 

mdr.ini

). 

S_mdr_UNKNOWN_ERROR 
 

0x55500033 

Unknown error. 

The error reported is unknown. Usually, this happens 
when a particular error is encounter. This error is oper-
ating system specific. If you are unable to find the sig-
nification of this error, please contact VMETRO. 

S_mdr_UNSUPPORTED_REQUEST 
 

0x55500034 

Unsupported 
request. 

The MDR Server does not support this command. 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for MDR




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands