manualshive.com logo in svg

artisan MDR, User Manual

Share
Download
artisan MDR User Manual Download Page 83

 

76 

MDR User Guide 

 

[

DpioInfo

] 

 
This section contains information the MDR Server needs to know about the DPIO 
modules installed on the MDR. 
 

SuspendSignal 

Disable

 or 

Enable

 DPIO suspend signal. If this item is not defined then the default 

value is 

Enable

. 

 

DPIO-InputUnits 

Number of DPIO input units that are used. Currently, this value is limited to 0 (no 
DPIO input PMC installed) or 1. If this item is not defined then the MDR Server 
ignores the DPIO input modules and the items 

DPIO-InputUnitXPmcSlot

 presented 

below. 
 

DPIO-OutputUnits 

Number of DPIO output units that are used. Currently, this value is limited to 0 (no 
DPIO output PMC installed) or 1. If this item is not defined then the MDR Server 
ignores the DPIO input modules and the following items 

DPIO-

OutputUnitXPmcSlot

 presented below. 

 

DPIO-InputUnitXPmcSlot

 

PMC slot of DPIO input unit X. This value should be 1 (or 2 according to the MDR 
standard configuration) for performance reasons. If the 

DPIO-InputUnits

 item is set 

to 0 or not defined then this item is ignored. If this item is missing then the DPIO 
input module X is ignored. 
 

DPIO-OutputUnitXPmcSlot 

PMC slot of DPIO output unit X, where X is a decimal number in the range 1-6. This 
value should be 1 or 2 for performance reasons. If the 

DPIO-OutputUnits

 item is set 

to 0 or not defined then this item is not used. If this item is missing then the DPIO 
output module X is ignored. 
 

StartInputWaitTime 

M

aximum time the MDR server will wait before receiving the first recorder block of 

data. The value of this item could be considered as the maximum time that the user 
could use to launch the DPIO input stream. If this item is missing or set to –1 then the 
MDR Server will wait forever at the beginning of the recording and never return, 
provided there is no input data (the watchdog timer is disabled in this case). 
 

InputWaitTime 

Maximum time the MDR server will wait between two consecutive recorder blocks 
of input data. The value of this item could be considered as the maximum time the 
data stream can use to transfer a block of data in the recorder (its size is the 
RecorderBlockSize value). If this item is missing or set to –1 then the MDR server 
will wait forever during the recording and never return, provided there is no input 
data (the watchdog timer is disabled in this case). 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for MDR




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands