manualshive.com logo in svg

artisan MDR, User Manual

Share
Download
artisan MDR User Manual Download Page 35

 

28 

MDR User Guide 

 

5.2.3  Installing the Fibre Channel QLogic Driver for Solaris 

Install the VMFC2X00 module on your Solaris SPARC station or SBC. 

5.2.3.1  Install the qla2X00 package 

If the MDR project is not already installed, follow the instructions

 

in

 

section 4.2:

 MDR 

Shell and API Installation

. 

 
Go to the directory called 

mdr-host-sw/fibre-channel-drivers/sun-solaris

 

 
First you need to uncompress the file 

qla2100_<VersionNumber>.zip

 (if you have a 

VMFC2100 board) or the image file 

qla2200<VersionNumber>.zip

 (if you have a 

VMFC2200 board) on your Solaris SPARC station (or SBC) using the 

unzip

 tool. 

Then you need to follow the instructions provided in the 

readme.pdf

 file. 

 
As a summary: 

• 

Uncompress the image file 

qla2100.Z

 (if you have a VMFC2100 board) or the 

image file 

qla2200.Z

 (if you have a VMFC2200 board) on your Solaris SPARC 

station (or SBC) using the 

uncompress

 

tool. 

• 

Become super-user. 

• 

Install the qla2x00 driver package with the command line: 

 

pkgadd –d <path>/qla2100 

or 

pkgadd –d <path>/qla2200 

 
and follow the prompts. The default answers for the questions the installation program 
asks can be accepted. If the installation program asks to perform some actions, accept 
them. 

• 

In the 

/etc/driver_aliases

 file, add the line 

qla2100 “pci129a,2100”

 if you 

have a VMFC-2100(P) board or 

qla2200 “pci129a,2200”

 if you have a VMFC-

2200(P) board. 

5.2.3.2  Prepare MDR Disk(s) for Solaris 

• 

Connect fibre-channel disk(s) to the VMFC-2X00 host card, 

• 

Use the 

format

 command and choose the appropriate disk, typically 

“/dev/rdsk/c?t?d?”

, 

• 

Label the disk (

‘l’

 command), 

• 

You may want to set the volume name (

‘v’

 command), e.g. ‘

”MDR-Vol1”

’. 

Note: This step is optional. 

5.2.3.3  Running the MDR Shell 

• 

In order to access the MDR storage device via FC connection, the MDR Shell 
program requires the administrator (or root) privileges. This is a requirement from 
the Windows and Solaris operating systems, not the MDR software. 

• 

Set the 

MDR_BASE

 environment variable as shown in section 4.3: 

Configuring the 

MDR Shell.

 

• 

Run the MDR Shell program and just press the Enter key when prompted for the 
MDR server name. 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for MDR




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands