37
INPUT CONNECTORS
HDMI LOOP OUT:
Connect a HDMI cable to the next HDMI LOOP IN monitor in order to create a
daisy chain loop installation.
HDMI LOOP IN:
Connect a HDMI cable from the previous HDMI LOOP OUT monitor, in order
create a daisy chain loop installation.
RS422 RJ45 IN connector:
Only used on the MASTER unit to externally control the
SHARE system using AHnet commands.
RS422 RJ45 OUT CONNECTOR:
Not used.
Ethernet RJ45 connector:
Only used in the MASTER unit to externally control the Share system.
On RS422 connectors, connect only RS422 signals. Be careful
to not connect Network cables or PoE signals. It will seriously
damage the monitor.
Note that if the monitor has a retractable HDMI cable on the cover plate or a fixed
HDMI connector on the cover plate, this HDMI input signal is connected to HDMI2
share local input signal.