21
GENERAL DYNAMICSHARE INFORMATION
If you access to a CLIENT unit, this window will appear:
You can “Demote To Normal client” or “Promote To Master” one unit through
the web configuration page. Make sure that just only one MASTER is
connected in one loop. If there are more than one MASTER connected in the
same HDMI loop, the system will not work properly.
Once you have all the units connected in the HDMI loop, and you have
access to the MASTER using a web browser, you need to “Rebuild loop”.
Click on “Rebuild loop” in the web browser configuration MASTER unit and the
MASTER will recognise all the units connected to the Share system. The MASTER
will identify all the units with an AHnet address number to control the entire
system. During the Rebuild Loop process, all the LEDs Share buttons indicators
will be flashing. It shouldn’t take more than 10 minutes for the MASTER to
rebuild the loop. By reloading the MASTER web page, all the devices
connected into the HDMI Share loop system will appear.
