24
GENERAL DYNAMICSHARE INFORMATION
Using DynamicShare
To activate the PRIVATE mode, press the button for 5 seconds (the green LED
will be on). In private mode, the monitor will always display the local input,
even if another monitor activates the share function.
VIEW push button:
This button selects the input signal to be shown on the screen
(local HDMI input or loop share input). By pressing the VIEW button, the Share system
selects between the loop or share signal and an active HDMI local input signal.
On the cover plate there are 4 LEDs indicators:
LED1: HDMI1 local input selected
LED2: HDMI2 local input selected
LED3: HDMI3 local input selected
LED4: Share signal selected
If the buttons are on the screen´s glass (e.g. DB2) , the buttons light indicating the
signal showed on the screen:
VIEW green: local input signal selected
SHARE green: Share signal selected
SHARE red: Local signal sent to the Share HDMI loop
SHARE push button:
Press this button to share the local signal. The red LED indicates
that the monitor is sending the local image to the HDMI loop, and all monitors will
display this signal. By pressing this button again, the sharing signal will be interrupted,
and the red LED will turn off.
