46
AHLink
AHlink is used to control and set-up the unit.
By default, the AHlink wireless signal is deactivated. To activate it, please
press and hold simultaneously the Open (1) (located on monitor top)
and Close (2) (located on glass) for 5 seconds. You can also activate
the AHlink wireless signal by suing the Interactive Setup Display (ISD)
located below the monitor. Press successively the Down arrow until the
AHlink appears on the LCD screen. Then, press the OK button and you
will hear a 5 Beep sound. This means that the AHlink is active.
The wireless AHLink signal automatically deactivates when there is
no device connected during more than 2 minutes. When the AHLink
deactivates, you will hear a long Beep sound.
To control and set up your AH product
with AHLink, please download it from the
App Store (IOS system) or from Google
Play (Android system) and execute it in
your handled device.
It is recommended on to select Auto
Connect and select Portrait on Orientation.
To connect it, select Scan for local devices.
