23
GENERAL DYNAMICSHARE INFORMATION
Start up
Every time that the share system starts up, the MASTER unit will check the
health of the HDMI loop. It should take around 3 minutes to finish this operation.
During this operation, the MASTER unit checks the loop and the units installed in
the Share system.
While the MASTER unit is checking the loop, the LEDs indicators of all units will
flash.
If after 3 minutes the LED indicators on the MASTER unit are still flashing, then
there is a faulty connection on the HDMI loop. Check the HDMI connections on
the monitor units, especially on those monitors where the LED indicators are not
flashing.
You can verify the start up Share system accessing to the MASTER Web page
control.
