Operation and Frequently Used Functions
Synergy Resection
User’s Guide
DFU-0213-7 Rev. 0
Page 28 of 50
Buttons
Most buttons send a message to the controller when activated and/or released.
The
Up
and
Down
speed buttons auto repeat when pressure is maintained. The
selected speed is not sent to the controller until the button is released.
Buttons - Main Screen
The Main Screen is displayed in one of two configurations depending on how
many handpieces are connected to the system. A single handpiece screen is
displayed with a single screen while a two handpiece screen has two equally
sized sections, top and bottom. A single handpiece screen has the same content
as a dual handpiece screen section, with the exception of the OSC Mode
button on a single handpiece screen.
Figure 12
Single Handpiece Screen Oscillation Mode Location
Table 18
Oscillation Mode - Operation
1.
Oscillation Mode
button
The OSC Mode button is only displayed when a
single handpiece is installed and the device is in
OSC mode.
When displayed, it can be pressed to toggle
between the different OSC modes.
This button is not displayed on a dual handpiece
screen.
