Arthrex AR-3210-0018 Instructions For Use Manual Download Page 61

Page: 61 / 68

DFU-0332r0_fmt_en-US

Page 57 of 64

5.0

APPENDIX [Radio

Module Information]

FCC Information:

Contains FCC ID:

RYK-261ACNBT

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two

conditions; (1) this device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference that

may cause undesired operation

CAUTION: changes or modifications not

expressly approved by Arthrex will void the user’s

authority to operate this equipment.

Industry Canada

Information:

Contains IC: 6158A-261ACNBT

IC Model: WPEQ-261ACN(BT)
This device complies with Industry Canada license-

exempt RSS standard(s). Operation is subject to

the following two conditions; (1) this device may not

cause harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired operation

European Union

Information:

Compliant with (RED)(2014/53/EU)

Summary of Contents for AR-3210-0018





































































Search results

Summary of Contents for AR-3210-0018

Reviews:

Related manuals for AR-3210-0018

Brands by name

Popular brands

Arthrex AR-3210-0018, Instructions For Use Manual

Search results

Summary of Contents for AR-3210-0018

Reviews:

Related manuals for AR-3210-0018

Brands by name

Popular brands