GB
14
13
To set the temperature of your wine cabinet
The temperature of your wine cabinet is set entirely from the control panel.
Single-temperature cabinets:
•
Press and hold down the
SET button for a few seconds until the set temperature (ST1) flashes.
The default temperature setting is 12°C (ideal maturing temperature). However, the temperature
can be set from 9°C - 15°C.
•
The recommended temperature setting range for wine storage is 10°C - 14°C.
•
Set the desired temperature using the
and
buttons.
•
Confirm your setting by pressing the
SET button. If you do not confirm by pressing this
key, the change in temperature setting will not take effect.
Your wine cabinet must be placed in a room with a temperature of 0°C - 35°C for solid door and 0°C
- 30°C for Glass door.
2 temperatures model:
BEVERAGE CENTER COMPARTMENT (BOTTOM):
•
Press and hold the
SET button for a few seconds until the SET temperature (ST1) flashes.
The default temperature setting is 3°C. However, the temperature can be set from 3°C to 6°C
•
Set the desired temperature using the
and
buttons.
•
Maintain pressure on the
SET button for a few seconds. This confirms the temperature
setting of the lower compartment of the cabinet (Beverage center) and allows you to access
the temperature setting (ST2) of the upper compartment (aging compartment).
AGING COMPARTMENT (TOP):
•
The default temperature is 12°C . However, the temperature can be set from 10°C à 14°C
•
Set the desired temperature using the
and
buttons.
•
Confirm your setting by pressing the SET button. If you do not confirm by pressing this key,
the change in temperature setting will not take effect.
Your wine cabinet must be placed in a room with a temperature of 12°C - 25°C.
3-temperature cabinets:
ZONE IN THE CENTRE OF THE CABINET OR MATURING ZONE:
•
Press and hold down the
SET button for a few seconds until the set temperature (ST1) flashes.
The default temperature setting is 12°C (ideal maturing temperature). However, the temperature
can be set from 10°C - 14°C.
•
Set the desired temperature using the
and
buttons.
•
Maintain pressure on the
SET button for a few seconds. This confirms the temperature setting
in the maturing zone and allows you to access the temperature setting of the red wine service
zone (ST2).
RED WINE SERVICE ZONE:
•
The default temperature setting is 18°C. However, the temperature can be set from 15°C - 20°C.
•
Set the desired temperature using the
and
buttons.
•
Confirm your setting by pressing the
SET buttons. If you do not confirm by pressing this key, the
change in temperature setting will not take effect.
N.B.: the temperature of the lower compartment (chilling compartment) results from the temperature set in the
maturing zone. The temperature gradient between these zones is 4 - 6°C.
N.B.: to function correctly, your cabinet must be placed in a room with a temperature of 12 - 30 °C.
Multi-temperature cabinets:
LOWER ZONE:
•
Press and hold down the
SET buttons for a few seconds until the set temperature (ST1) flashes.
The default temperature setting is 8°C. However, the temperature can be set from 6°C - 10°C.
•
Set the desired temperature using the
and
buttons.
•
Maintain pressure on the
SET buttons for a few seconds. This confirms the temperature setting
in the lower zone of the cabinet and allows you to access the temperature setting of the upper
zone (ST2).
UPPER ZONE:
•
The default temperature setting is 18°C. However, the temperature can be set from 15°C - 20°C.
•
Set the desired temperature using the
and
buttons.
•
Confirm your setting by pressing the
SET buttons. If you do not confirm by pressing this key, the
change in temperature setting will not take effect.
N.B.: to function correctly, your cabinet must be placed in a room with a temperature of 12 - 30 °C.
Alarms
If the temperature inside the cabinet is 6°C above or below the temperature setting, for over 3 hrs, the
control activates the alarm and the warning light appears.
NB: If you have loaded your cabinet with a large number of bottles, it can take several hours
for your wine cabinet’s temperature to stabilise. The warning light may then appear. Wait
a while then check again. If the alarm warning light does not disappear, contact your retailer.
When commissioning your cabinet, or after significant changes to the temperature setting, it can take
several hours for your wine cabinet to stabilize and display the new desired temperature.
Wait a few days. If the temperature does not stabilise, contact your retailer.
Everyday maintenance of your wine cabinet
Your ARTEVINO cabinet is a tried and tested appliance. The following few operations will allow your
cabinet to perform at its best for many years to come.
1) Clean the water drain at the bottom of the wine cabinet. Pay attention that nothing is blocking this drain.
2) Regularly vacuum (twice a year) the condenser (black metal grill attached to the back of your wine
cabinet).
3) Once a year, thoroughly clean the inside of your wine cabinet, remembering to unplug it after removing
your bottles (use a gentle cleaning product and water, remember to rinse well and then dry it with a soft
rag).
4) It is often necessary to clean the door seal. Using unsuitable cleaning products can cause premature
ageing of the seals. Certain rules must therefore be followed: whenever you clean the seal, always rinse
off any cleaning product with clear water. All traces of cleaning product must be removed from the seal.
ARTEVINO only recommends using a mild soapy solution. If this proves insufficient, it is possible to
occasionally use an ethanol-based solution, provided that the concentration used is less than 10% and that
the seal is then rinsed thoroughly with clear water.
