manualshive.com logo in svg

Artesyn AXP640, Installation And Use Manual, Page: 75 / 190

Share
Download
Artesyn AXP640 Installation And Use Manual Download Page 75

AXP640 Shelf Description

AXP640 Installation and Use (6806800M24F)

75

Figure 2-17 Declaration of Conformity - DC

___________________________________________________  

___

05/20/2014______ 

Tom Tuttle, Manager, Product Testing Services 

 

 

                Date (MM/DD/YYYY)

 

E

C Declaration of Conformity

 

According to EN 17050-1:2004 

Manufacturer’s Name:

 

Artesyn Embedded Technologies 
Embedded Computing

 

Manufacturer’s Address:

 

 

 

Zhongshan General Carton Box Factory Co. Ltd. No 62, Qi

 

Guan Road West, Shiqi District, 528400 Zhongshan City

 

Guangdong, PRC

 

Declares that the following product, in accordance with the requirements of 2004/108/EC, 2006/95/EC, 
2011/65/EU and their amending directives,

 

Product:

 

ATCA DC 6 Slot Shelf 

Model Name/Number:

 

AXP640-DC Series 

has been designed and manufactured to the following specifications:

 

EN55022: 2006 (A1: 2007) 

EN55024:1998 (A1: 2001 + A2: 2003)  

ETSI EN 300 386 V1.5.1 (2010-10)  

IEC 60950-1:2005 (2nd Edition), EN60950-1:2006+A11:2009   

2011/65/EU RoHS Directive  

As manufacturer we hereby declare that the product named above has been designed to comply with the rele-
vant sections of the above referenced specifications. This product complies with the essential health and safety 
requirements of the above specified directives. We have an internal production control system that ensures 
compliance between the manufactured products and the technical documentation. 

Summary of Contents for AXP640































































































































































































Reviews:

No comments