manualshive.com logo in svg

Artesyn Embedded Technology ATCA-7540, Installation And Use Manual, Page: 39 / 324

Share
Download
Artesyn Embedded Technology ATCA-7540 Installation And Use Manual Download Page 39

 

 

Sicherheitshinweise

ATCA-7540 Installation and Use (6806871A01A)

39

Die Messung der EMV Abstrahlung wurde in einem Referenzsystem mit deaktiviertem Spread 
Spectrum-Feature qualifiziert. Beachten Sie, dass der Betreiber die EMV-
Abstrahlungsanforderung von anderer Anforderungen / Einstellungen überprüfen muss (z. B. 
Spread Spectrum aktiviert).

Schaltereinstellungen

Fehlfunktion des Blades

Ändern Sie nicht die Schaltereinstellungen, die als „Reserved” gekennzeichnet sind. Schalter, 
die mit „Reserved” gekennzeichnet sind, können produktionsbedingte Funktionen enthalten 
und zu einer Fehlfunktion des Produktes führen, wenn die Einstellungen geändert werden. 

Überprüfen und ändern Sie die Schaltereinstellung, die nicht mit „Reserved” gekennzeichnet 
sind, bevor Sie das Blade installieren.

Beschädigung des Blades

Überprüfen und ändern Sie die Schaltereinstellung, bevor Sie das Blade installieren.

Das Verstellen von Schaltern während des laufenden Betriebes kann zur Beschädigung des 
Blades führenn.

Laser

Verletzungsgefahr

Wenn ein Etikett mit der Aufschrift CLASS 1 LASER PRODUCT auf Ihrem System angebracht ist, 
ist das Gerät mit einem Lasergerät ausgestattet. Diese Geräte enthalten ein Lasersystem, das 
sichtbare oder unsichtbare Laserstrahlung (oder beides) erzeugt und für die Augen schädlich 
sein kann.

Suchen Sie zusätzliche Informationen (Leistung, Wellenlänge, Sichtbarkeit, Impulsdauer, 
anwendbare Normen), bevor Sie Geräte warten. Blicken Sie niemals mit einem optischen 
Gerät auf das Lasergeräte.

Summary of Contents for ATCA-7540





































































































































































































































































































































Reviews:

No comments