Page 15
Scan Do® HD User’s Manual
Scan Do® HD
Certification
WARNING
:
This equipment generates, uses and can radiate radio frequency energy and if
not installed and used in accordance with the instruction manual, may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to Subpart B of Part 15
of FCC Rules, which are designed to provide reasonable protection against such
interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference in which case the
user, at his own expense, will be required to take whatever measures may be
required to correct the interference.
Standards to which conformity is declared:
EMC
EN 55022: 1994, CISPR 22: 1993, Class A Limit
EN 50082-1: 1992
IEC 801-2: 1991
IEC 801-3: 1984
IEC 801-4: 1988
Complies with FDA performance standard for laser products, Title 21,
Code of Federal Regulations, Sub-Chapter J and IEC 60825-1
FCC Statement
CE Information
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRONIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN!
CAUTION
TO REDUCE THE RISK OF ELECTRONIC SHOCK, DO NOT REMOVE
COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This symbol warns the user of uninsulated
voltage within the unit that can cause
dangerous electronic shocks.
FDA & IEC Statement
The fiber optic transmitting element in the Scan Do® HD contains a solid state Laser Diode
located within the optical connector. This device emits invisible infrared electromagnetic
radiation which can be harmful to human eyes. The radiation from this optical connector,
if viewed at close range without a fiber optic cable connected to the optical connector,
may be of sufficient intensity to cause instantaneous damage to the retina of the eye.
Direct viewing of this radiation should be avoided at all times.
This symbol alerts the user that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
In the literature accompanying this unit,
this symbol warns the user of dangerous
conditions to avoid.
Turn off unit or laser before connecting
or disconnecting optical cable!
