Artec MULTIEYE, User Manual

Page: 98 / 204

MULTIEYE Usermanual 98
© 2008 artec technologies AG
General tip:
If you are responsible for the system or for setting it up, you should create a “Superuser”
account with full administrator rights for yourself.
You should, however make changes to the system only through this superuser account. The
advantage is that if you made something wrong, you can still change it by logging in as the
´normal´ Administrator.
To implement changes to the system, you should always log in with the user account.
Attention:
By clicking the key combination Ctrl-L from within MultiScreen, you can log in with other user
rights (e.g. as Administrator).
8.7.1 Auto-Login
Auto Login:
With this function, a user will automatically be logged into MultiScreen during startup
of the system.
By default, „localhost“ is entered as the server, i.e. MultiScreen automatically logs into
the MULTIEYE-HYBRID kernel of the local computer at the next start-up.
Do not forget to select a user and - if required - enter the password.
For a complete system re-start, for example after power outage Automatically login .
8.7.2 Two users login / Four Eyes Principle
Sometimes the employment of closed circuit television is only approved when an operation or analysis can be
done by two persons. Therefore it is possible to set the according rights in the "User Management
è
MULTIEYE
settings
è
Two user login required". Then it is required that two users of different groups, where the "Four Eyes
Principle" is activated, login one after another.
37