Artec MULTIEYE, User Manual

Page: 165 / 204

Example applications 165
© 2008 artec technologies AG
13.1.1 Interaction of the MULTIEYE-Recorder with EBÜS
The process of an alarm event and how the different components interact.
1. The MULTIEYE-Recorder generates an alarm-image and stores this into a predefined folder. Similar the software
starts the external program AccFTPUploader - installed on the same machine - with the parameters of the just
generated image.
2. The AccFTPUploader will be started and the software sends the stored alarm-image to a defined FTP-server.
Circa 12 second after finishing the job the AccFTPUploader will be terminated.
3. The Alarm-server is permanently checking the folders where the FTP-server stores the alarm-images.
4. If the FTP-server has received an alarm-image, the Alarm-server generates a message to all connected
EBÜS-Clients. One of these clients checks out the this alarm-message and the generated image is loaded from
the corresponding folder and shown in the preview of the client.
5. At least the client is switched to the live-stream of the recorder.
Attention:
The Alarm-server and the FTP-server have to be installed on the same PC, because the
Alarm-server can only monitor local folders.
Hint:
It's possible to run the combination Alarm-FTP-server:
1. on a separate PC
2. on a EBÜS-client somewhere in the network.